docs: add readme

README.md

@@ -0,0 +1,106 @@
+# Ecosteno Custom Keymaps
+
+This repository contains the custom keymaps for the Ecosteno keyboard. It also contains the guide on how to set up the keymaps.
+
+# Table of Contents
+
+- [Ecosteno Custom Keymaps](#ecosteno-custom-keymaps)
+- [Table of Contents](#table-of-contents)
+- [Related Articles](#related-articles)
+- [Pre-requisites](#pre-requisites)
+- [Clone Repository](#clone-repository)
+- [Set Up QMK Environment](#set-up-qmk-environment)
+  - [1. Prepare Build Environment](#1-prepare-build-environment)
+  - [2. Run QMK Setup](#2-run-qmk-setup)
+  - [3. Copy the keyboard to the QMK directory](#3-copy-the-keyboard-to-the-qmk-directory)
+  - [4. Test Build Environment](#4-test-build-environment)
+- [Remapping Keys](#remapping-keys)
+  - [Edit the Keymap File](#edit-the-keymap-file)
+  - [Copy the Keymap to the QMK Directory](#copy-the-keymap-to-the-qmk-directory)
+  - [Compile the Keymap](#compile-the-keymap)
+- [Flashing the Keyboard](#flashing-the-keyboard)
+
+# Related Articles
+
+- [QMK Firmware Guide](https://docs.qmk.fm/newbs)
+
+# Pre-requisites
+
+- EcoSteno Keyboard
+- MacOS
+- [Homebrew](https://brew.sh/)
+- [EcoSteno Firmware](https://github.com/afiqzudinhadi/EcoSteno-Firmware)
+
+# Clone Repository
+
+```bash
+git clone git@github.com:afiqzudinhadi/EcoSteno-Firmware.git
+```
+
+# Set Up QMK Environment
+
+## 1. Prepare Build Environment
+
+```bash
+brew install qmk/qmk/qmk
+```
+
+## 2. Run QMK Setup
+
+```bash
+qmk setup
+```
+
+Answer 'Y' to all the prompts.
+
+## 3. Copy the keyboard to the QMK directory
+
+```bash
+cp -r keyboards/* ~/qmk_firmware/keyboards/
+```
+
+## 4. Test Build Environment
+
+```bash
+qmk compile -kb noll/ecosteno -km default
+```
+
+# Remapping Keys
+
+## 1. Edit the Keymap File
+
+Keymaps are located in the following directory:
+
+```bash
+keyboards/noll/ecosteno/keymaps/default/keymap.c
+```
+
+Keymap guide can be found [here](https://docs.qmk.fm/keycodes_basic).
+
+## 2. Copy the Keymap to the QMK Directory
+
+If keymap file is edited, copy the keymap to the QMK directory:
+
+```bash
+cp -r keyboards/* ~/qmk_firmware/keyboards/
+```
+
+## 3. Compile the Keymap
+
+```bash
+qmk compile -kb noll/ecosteno -km default
+```
+
+# Flashing the Keyboard
+
+1. Plug in the keyboard to the computer.
+2. Press the reset button on the back of the keyboard near the USB port.
+   1. LEDs on the keyboard will turn off.
+3. Run the following command to flash the keyboard:
+
+```bash
+qmk flash -kb noll/ecosteno -km default
+```
+
+4. The keyboard will restart and the new keymap will be loaded.
+   1. LEDs on the keyboard will turn on.