better config, display oled/view, animations bongo cat etc., rgb full, puchi-ble/nicenano_v2, combos, macros, reset/bootloader, ... etc.

config/config_ready/nice/view/corne.conf

@@ -0,0 +1,105 @@
+# ========================================
+# FileName: corne.conf
+# Date: 07.06.2023
+# Author: Marcos Chow Castro
+# Email: mctechnology170318@gmail.com
+# GitHub: https://github.com/mctechnology17
+# Brief: configuration file for ZMK firmware
+# Board: nice_nano_v2 and puchi_ble_v1
+#                              ╔═╦═╦═╗
+#                       ╔════╗ ║║║║║╔╝
+#                       ║╔╗╔╗║ ║║║║║╚╗
+#                       ╚╝║║╚╝ ║╠═╩╩═╝
+#                         ║╠═╦═╣╚╦═╦╦═╦╗╔═╦═╦╦╗
+#                         ║║╩╣═╣║║║║║╬║╚╣╬║╬║║║
+#                         ╚╩═╩═╩╩╩╩═╩═╩═╩═╬╗╠╗║
+#                                         ╚═╩═╝
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+# =========================================
+# on config_zmk.h file enable/disable the following options, if you want to
+# use CONFIG_ZMK_MOUSE=y, CONFIG_ZMK_RGB_UNDERGLOW=y, CONFIG_ZMK_RGB_UNDERGLOW=y
+# mouse config, 1 = enable, 0 = disable, default = 1
+# 2 = enable, but with rgb matrix
+# #define MC_TECHNOLOGY_MOUSE_ENABLE 1
+# rgb matrix config, 1 = enable, 0 = disable, default = 0
+# #define MC_TECHNOLOGY_RGB_ENABLE 0
+# define macros on for .dtsi file 1 = enable, 0 = disable default = 1
+# #define MC_TECHNOLOGY_MACROS_ENABLE 1
+
+### Keyboard name
+# 1 nice
+CONFIG_ZMK_KEYBOARD_NAME="Nice Corne"
+# 1 puchi
+# CONFIG_ZMK_KEYBOARD_NAME="Puchi Corne"
+
+### Boost Bluetooth TX power, also make Bluetooth stronger
+CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
+# Tune bluetooth profiles for quick select
+# CONFIG_BT_MAX_CONN=3
+
+### POWER OPTIONS
+CONFIG_ZMK_EXT_POWER=y
+CONFIG_ZMK_SLEEP=y
+# 2 puchi 15 min (15*60*1000ms)
+# CONFIG_ZMK_IDLE_SLEEP_TIMEOUT=900000
+# 2 nice 30 min (30*60*1000ms)
+# CONFIG_ZMK_IDLE_SLEEP_TIMEOUT=1800000
+# CONFIG_ZMK_IDLE_TIMEOUT=120000
+# Disable external power when not connected to USB
+# CONFIG_ZMK_EXT_POWER_USB_ONLY=y
+
+### MOUSE
+CONFIG_ZMK_MOUSE=y
+
+### RGB UNDERGLOW
+# uncomment to enable RGB Underglow or backlight
+# CONFIG_ZMK_RGB_UNDERGLOW=y
+# CONFIG_WS2812_STRIP=y
+# apaga si no se usa el teclado
+# CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE=y
+# 0	Solid color    1 Breathe     2	Spectrum     3	Swirl
+# CONFIG_ZMK_RGB_UNDERGLOW_EFF_START=3
+# nivel de brillo en porcentaje, el valor por defecto es 10 por ciento
+# CONFIG_ZMK_RGB_UNDERGLOW_BRT_STEP=1
+# Turn off RGB underglow when keyboard goes into idle state
+# CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE=y
+
+# # Hue step in degrees (0-359) used by RGB actions default 10
+# CONFIG_ZMK_RGB_UNDERGLOW_HUE_STEP=30
+
+# # Brightness step in percent used by RGB actions default 10
+# CONFIG_ZMK_RGB_UNDERGLOW_SAT_STEP=2
+# CONFIG_ZMK_RGB_UNDERGLOW_HUE_START=240
+# CONFIG_ZMK_RGB_UNDERGLOW_SAT_START=10
+# CONFIG_ZMK_RGB_UNDERGLOW_BRT_START=15
+
+# Uncomment the line below to disable external power toggling by the underglow.
+# By default toggling the underglow on and off also toggles external power
+# on and off. This also causes the display to turn off.
+# CONFIG_ZMK_RGB_UNDERGLOW_EXT_POWER=n
+
+### OLED Display
+# CONFIG_ZMK_DISPLAY=y
+# esto creo que ya no es necesario
+# CONFIG_ZMK_DISPLAY_WORK_QUEUE_DEDICATED=y
+# CONFIG_ZMK_DISPLAY_STATUS_SCREEN_BUILT_IN=y
+
+### WIDGET SETTINGS compatible SOLO con OLED
+# No Widget configurations added since nice!view has its own custom widgets
+# activar solo estos dos widgets
+# CONFIG_ZMK_WIDGET_WPM_STATUS=n
+# CONFIG_ZMK_WIDGET_BATTERY_STATUS_SHOW_PERCENTAGE=y
+# CONFIG_ZMK_WIDGET_LAYER_STATUS=y
+# CONFIG_ZMK_WIDGET_BATTERY_STATUS=y
+# CONFIG_ZMK_WIDGET_OUTPUT_STATUS=y
+
+### HID para nice!view ePaperDisplay
+# Enable eager debouncing
+# "Eager Debouncing"
+# Trying to lower the input lag.
+CONFIG_ZMK_KSCAN_DEBOUNCE_PRESS_MS=1
+CONFIG_ZMK_KSCAN_DEBOUNCE_RELEASE_MS=5
+
+### Improves compatibility with iPad
+CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y