112 lines
4.7 KiB
YAML
112 lines
4.7 KiB
YAML
# ========================================
|
|
# FileName: build.yaml
|
|
# Date: 07.06.2023
|
|
# Author: Marcos Chow Castro
|
|
# Email: mctechnology170318@gmail.com
|
|
# GitHub: https://github.com/mctechnology17
|
|
# Brief: configuration file for ZMK firmware
|
|
# Board: nice_nano_v2 and puchi_ble_v1
|
|
# shield: corne_left nice_view_adapter nice_view,
|
|
# corne_right nice_view_adapter nice_view,
|
|
# corne_left, corne_right and settings_reset
|
|
# =========================================
|
|
# ╔═╦═╦═╗
|
|
# ╔════╗ ║║║║║╔╝
|
|
# ║╔╗╔╗║ ║║║║║╚╗
|
|
# ╚╝║║╚╝ ║╠═╩╩═╝
|
|
# ║╠═╦═╣╚╦═╦╦═╦╗╔═╦═╦╦╗
|
|
# ║║╩╣═╣║║║║║╬║╚╣╬║╬║║║
|
|
# ╚╩═╩═╩╩╩╩═╩═╩═╩═╬╗╠╗║
|
|
# ╚═╩═╝
|
|
# This file generates the GitHub Actions matrix
|
|
# For simple board + shield combinations, add them
|
|
# to the top level board and shield arrays, for more
|
|
# control, add individual board + shield combinations to
|
|
# the `include` property, e.g:
|
|
#
|
|
# board: [ "nice_nano_v2" ]
|
|
# shield: [ "corne_left", "corne_right" ]
|
|
# include:
|
|
# - board: bdn9_rev2
|
|
# - board: nice_nano_v2
|
|
# shield: reviung41
|
|
#
|
|
# Split Keyboard Halves Unable to Pair
|
|
# https://zmk.dev/docs/troubleshooting
|
|
# - board: nice_nano_v2
|
|
# shield: settings_reset
|
|
# Reset Split Keyboard Procedure
|
|
# Perform the following steps to reset both halves of your split keyboard:
|
|
# - Put each half of the split keyboard into bootloader mode.
|
|
# - Flash one of the halves of the split with the downloaded settings reset UF2
|
|
# image. Immediately after flashing the chosen half, put it into bootloader
|
|
# mode to avoid accidental bonding between the halves.
|
|
# - Repeat step 2 with the other half of the split keyboard.
|
|
# - Flash the actual image for each half of the split keyboard (e.g
|
|
# my_board_left.uf2 to the left half, my_board_right.uf2 to the right half).
|
|
#
|
|
# After completing these steps, pair the halves of the split keyboard
|
|
# together by resetting them at the same time. Most commonly, this is done by
|
|
# grounding the reset pins for each of your keyboard's microcontrollers or
|
|
# pressing the reset buttons at the same time.
|
|
#
|
|
# cmake-args: -DKEYMAP_FILE=../../config/other-corne.keymap -DCONFIG_ZMK_KEYBOARD_NAME=\"other-corne\" -DEXTRA_CONF_FILE=../../config/other-corne.conf
|
|
---
|
|
include:
|
|
|
|
### CORNE START ###
|
|
- board: nice_nano_v2
|
|
shield: corne_left nice_oled
|
|
cmake-args: -DCONFIG_ZMK_KEYBOARD_NAME=\"Corne_Oled_RGB\"
|
|
artifact-name: nice_corne_left_oled_rgb
|
|
snippet: rgb-config studio-rpc-usb-uart
|
|
# nice_nano_v2 + nice_oled + RGB (RIGHT)
|
|
- board: nice_nano_v2
|
|
shield: corne_right nice_oled
|
|
cmake-args: -DCONFIG_ZMK_KEYBOARD_NAME=\"Corne_Oled_RGB\"
|
|
artifact-name: nice_corne_right_oled_rgb
|
|
snippet: rgb-config
|
|
|
|
### SOFLE START ###
|
|
- board: nice_nano_v2
|
|
shield: sofle_left nice_oled
|
|
cmake-args: -DCONFIG_ZMK_KEYBOARD_NAME=\"Sofle_Oled\" -DCONFIG_ZMK_STUDIO=y -DCONFIG_ZMK_SLEEP=y -DCONFIG_ZMK_IDLE_TIMEOUT=60000
|
|
artifact-name: nice_sofle_left_rgb_oled
|
|
snippet: rgb-config studio-rpc-usb-uart
|
|
- board: nice_nano_v2
|
|
shield: sofle_right nice_oled
|
|
cmake-args: -DCONFIG_ZMK_SLEEP=y -DCONFIG_ZMK_IDLE_TIMEOUT=60000
|
|
artifact-name: nice_sofle_right_rgb_oled
|
|
snippet: rgb-config
|
|
|
|
# ### LILY58 START ###
|
|
# # nice!oled lily58
|
|
# - board: nice_nano_v2
|
|
# shield: lily58_left nice_oled
|
|
# cmake-args: -DCONFIG_ZMK_KEYBOARD_NAME=\"lily58_Oled\" -DCONFIG_ZMK_STUDIO=y -DCONFIG_ZMK_SLEEP=y -DCONFIG_ZMK_IDLE_TIMEOUT=60000
|
|
# artifact-name: nice_lily58_left_oled
|
|
# snippet: studio-rpc-usb-uart
|
|
# - board: nice_nano_v2
|
|
# shield: lily58_right nice_oled
|
|
# cmake-args: -DCONFIG_ZMK_SLEEP=y -DCONFIG_ZMK_IDLE_TIMEOUT=60000
|
|
# artifact-name: nice_lily58_right_oled
|
|
|
|
# # peripheral_left
|
|
# - board: nice_nano_v2
|
|
# shield: lily58_left_peripheral nice_oled
|
|
# cmake-args: -DCONFIG_ZMK_SLEEP=y -DCONFIG_ZMK_IDLE_TIMEOUT=60000
|
|
# artifact-name: nice_lily58_left_peripheral_oled
|
|
|
|
# # ProMicro_Dongle
|
|
# - board: nice_nano_v2
|
|
# shield: lily58_dongle_pro_micro dongle_display
|
|
# cmake-args: -DCONFIG_ZMK_KEYBOARD_NAME=\"lily58Dongle_P\" -DCONFIG_ZMK_STUDIO=y -DCONFIG_ZMK_SLEEP=n -DCONFIG_ZMK_IDLE_TIMEOUT=60000
|
|
# artifact-name: nice_lily58_dongle_oled
|
|
# snippet: studio-rpc-usb-uart
|
|
# ### LILY58 END ###
|
|
|
|
### SETTINGS_RESET START ###
|
|
- board: nice_nano_v2
|
|
shield: settings_reset
|
|
artifact-name: nice_settings_reset
|
|
### SETTINGS_RESET END ###
|