63 lines
2.9 KiB
YAML
63 lines
2.9 KiB
YAML
# ========================================
|
|
# FileName: build.yaml
|
|
# Date: 07.06.2023
|
|
# Author: Marcos Chow Castro
|
|
# Email: mctechnology170318@gmail.com
|
|
# GitHub: https://github.com/mctechnology17
|
|
# Brief: configuration file for ZMK firmware
|
|
# Board: nice_nano_v2 and puchi_ble_v1
|
|
# shield: corne_left nice_view_adapter nice_view,
|
|
# corne_right nice_view_adapter nice_view,
|
|
# corne_left, corne_right and settings_reset
|
|
# =========================================
|
|
# ╔═╦═╦═╗
|
|
# ╔════╗ ║║║║║╔╝
|
|
# ║╔╗╔╗║ ║║║║║╚╗
|
|
# ╚╝║║╚╝ ║╠═╩╩═╝
|
|
# ║╠═╦═╣╚╦═╦╦═╦╗╔═╦═╦╦╗
|
|
# ║║╩╣═╣║║║║║╬║╚╣╬║╬║║║
|
|
# ╚╩═╩═╩╩╩╩═╩═╩═╩═╬╗╠╗║
|
|
# ╚═╩═╝
|
|
# This file generates the GitHub Actions matrix
|
|
# For simple board + shield combinations, add them
|
|
# to the top level board and shield arrays, for more
|
|
# control, add individual board + shield combinations to
|
|
# the `include` property, e.g:
|
|
#
|
|
# board: [ "nice_nano_v2" ]
|
|
# shield: [ "corne_left", "corne_right" ]
|
|
# include:
|
|
# - board: bdn9_rev2
|
|
# - board: nice_nano_v2
|
|
# shield: reviung41
|
|
#
|
|
# Split Keyboard Halves Unable to Pair
|
|
# https://zmk.dev/docs/troubleshooting
|
|
# - board: nice_nano_v2
|
|
# shield: settings_reset
|
|
# Reset Split Keyboard Procedure
|
|
# Perform the following steps to reset both halves of your split keyboard:
|
|
# - Put each half of the split keyboard into bootloader mode.
|
|
# - Flash one of the halves of the split with the downloaded settings reset UF2
|
|
# image. Immediately after flashing the chosen half, put it into bootloader
|
|
# mode to avoid accidental bonding between the halves.
|
|
# - Repeat step 2 with the other half of the split keyboard.
|
|
# - Flash the actual image for each half of the split keyboard (e.g
|
|
# my_board_left.uf2 to the left half, my_board_right.uf2 to the right half).
|
|
#
|
|
# After completing these steps, pair the halves of the split keyboard
|
|
# together by resetting them at the same time. Most commonly, this is done by
|
|
# grounding the reset pins for each of your keyboard's microcontrollers or
|
|
# pressing the reset buttons at the same time.
|
|
---
|
|
include:
|
|
- board: nice_nano_v2 # puchi_ble_v1 nice_nano_v2
|
|
shield: corne_left nice_view_adapter nice_view # con display
|
|
# shield: corne_left # con OLED display
|
|
# - board: puchi_ble_v1 # puchi_ble_v1 nice_nano_v2
|
|
- board: nice_nano_v2 # puchi_ble_v1 nice_nano_v2
|
|
shield: corne_right nice_view_adapter nice_view # con display
|
|
# shield: corne_right # con OLED display
|
|
# - board: puchi_ble_v1 # puchi_ble_v1 nice_nano_v2
|
|
# - board: puchi_ble_v1
|
|
# shield: settings_reset
|