6690d535e6
refactor(core): Adjust our approach for upstream Zephyr boards Move to using proper HWMv2 board extensions https://docs.zephyrproject.org/4.1.0/hardware/porting/board_porting.html#board-extensions for extending upstream Zephyr boards for use with ZMK. With this change, using upstream Zephyr board IDs directly, e.g. `seeeduino_xiao` will be stock versions as found upstream. To use a board variant that is tuned for ZMK use, use the `zmk` variant, e.g. `seeeduino_xiao//zmk` which is shorthand for `seeeduino_xiao/samd21g18a/zmk`. refactor(boards): Move to ZMK specific variants for the nRFMicro board For consistency, adjust the nRFMicro board definition to offer a "vanilla" Zephyr board, and then ZMK variants, e.g. `nrfmicro/nrf52840/zmk`. refactor(boards): Move to ZMK specific variant for the bluemicro840 board For consistency, adjust the bluemicro840 board definition to offer a "vanilla" Zephyr board, and then ZMK variant, e.g. `bluemicro840//zmk`. refactor(boards): Make tofu65 to ZMK variant by default Make the standard Tofu65 board ID be `tofu65/rp2040/zmk` or `tofu65//zmk` by shorthand. refactor(boards): Move BDN9 to ZMK variant by default Make the standard BDN9 board ID be `bdn9/stm32f072xb/zmk` or `bdn9//zmk` by shorthand. refactor(boards): Move Puchi BLE to ZMK variant by default Make the standard Puchi BLE board ID be `puchi_ble/nrf52840/zmk` or `puchi_ble//zmk` by shorthand. refactor(boards): Move Adv360 Pro to ZMK variant by default Make the standard Adv360 Pro board ID be `adv360pro_left/nrf52840/zmk` or `adv360pro_left//zmk` by shorthand and for right as well. refactor(boards): Move nRF52840 M2 to ZMK variant by default Make the standard nRF52840 M2 board ID be `nrf52840_m2/nrf52840/zmk` or `nrf52840_m2//zmk` by shorthand. refactor(boards): Move Pillbug to ZMK variant by default Make the standard Pillbug board ID be `pillbug/nrf52840/zmk` or `pillbug//zmk` by shorthand. refactor(boards): Move s40nc to ZMK variant by default Make the standard s40nc board ID be `s40nc/nrf52840/zmk` or `s40nc//zmk` by shorthand. refactor(boards): Move nice!60 to ZMK variant by default Make the standard nice!60 board ID be `nice60/nrf52840/zmk` or `nice60//zmk` by shorthand. refactor(boards): Move planck to ZMK variant by default Make the standard planck board ID be `planck/stm32f303xc/zmk` or `planck//zmk` by shorthand. refactor(boards): Move preonic to ZMK variant by default Make the standard preonic board ID be `preonic/stm32f303xc/zmk` or `preonic//zmk` by shorthand. refactor(boards): Move ferris to ZMK variant by default Make the standard ferris board ID be `ferris/stm32f072xb/zmk` or `ferris//zmk` by shorthand. refactor(boards): Move Proton-C to ZMK variant by default Make the standard Proton-C board ID be `proton_c/stm32f303xc/zmk` or `proton_c//zmk` by shorthand. refactor(boards): Move Corneish Zen to ZMK variant by default Make the standard Corneish Zen board ID be `corneish_zen_left/nrf52840/zmk` or `corneish_zen_left//zmk` by shorthand and for right as well. refactor(boards): Move nice!nano to ZMK variant by default Make the standard nice!nano board ID be `nice_nano/nrf52840/zmk` or `nice_nano//zmk` by shorthand. refactor(boards): Move mikoto to ZMK variant by default Make the standard mikoto board ID be `mikoto/nrf52840/zmk` or `mikoto//zmk` by shorthand. refactor(boards): Move Polarity Works boards to ZMK variants Make the standard Polarity Works board IDs be `zmk` variants. doc: Update docs/blog post to reference ZMK variants * Update Zephyr 4.1 blog post to mention ZMK variants * Add note to hardware support page about variants docs: Fix up shield board overlays for new board IDs Adjust our documentation to properly use the correct qualified board overlay file names that match our new board conventions.
57 lines
2 KiB
Text
57 lines
2 KiB
Text
/*
|
|
* Copyright (c) 2020 Derek Schmell
|
|
*
|
|
* SPDX-License-Identifier: MIT
|
|
*/
|
|
|
|
/ {
|
|
pro_micro: connector {
|
|
compatible = "arduino-pro-micro";
|
|
#gpio-cells = <2>;
|
|
gpio-map-mask = <0xffffffff 0xffffffc0>;
|
|
gpio-map-pass-thru = <0 0x3f>;
|
|
gpio-map
|
|
= <0 0 &gpio0 8 0> /* D0 D2 */
|
|
, <1 0 &gpio0 6 0> /* D1 D3*/
|
|
, <2 0 &gpio0 15 0> /* D2 D1*/
|
|
, <3 0 &gpio0 17 0> /* D3 D0*/
|
|
, <4 0 &gpio0 20 0> /* D4/A6 D4*/
|
|
, <5 0 &gpio0 13 0> /* D5 C6*/
|
|
, <6 0 &gpio0 24 0> /* D6/A7 D7*/
|
|
, <7 0 &gpio0 9 0> /* D7 E6*/
|
|
, <8 0 &gpio0 10 0> /* D8/A8 B4*/
|
|
, <9 0 &gpio1 6 0> /* D9/A9 B5*/
|
|
, <10 0 &gpio1 11 0> /* D10/A10 B6*/
|
|
, <16 0 &gpio0 28 0> /* D16 B2*/
|
|
, <14 0 &gpio0 3 0> /* D14 B3*/
|
|
, <15 0 &gpio1 13 0> /* D15 B1*/
|
|
, <18 0 &gpio0 2 0> /* D18/A0 F7*/
|
|
, <19 0 &gpio0 29 0> /* D19/A1 F6*/
|
|
, <20 0 &gpio0 26 0> /* D20/A2 F5*/
|
|
, <21 0 &gpio0 30 0> /* D21/A3 F4*/
|
|
;
|
|
};
|
|
|
|
pro_micro_a: connector_a {
|
|
compatible = "arduino-pro-micro";
|
|
#gpio-cells = <2>;
|
|
gpio-map-mask = <0xffffffff 0xffffffc0>;
|
|
gpio-map-pass-thru = <0 0x3f>;
|
|
gpio-map
|
|
= <0 0 &gpio0 2 0> /* D18/A0 F7*/
|
|
, <1 0 &gpio0 29 0> /* D19/A1 F6*/
|
|
, <2 0 &gpio0 26 0> /* D20/A2 F5*/
|
|
, <3 0 &gpio0 30 0> /* D21/A3 F4*/
|
|
, <6 0 &gpio0 20 0> /* D4/A6 D4*/
|
|
, <7 0 &gpio0 24 0> /* D6/A7 D7*/
|
|
, <8 0 &gpio0 10 0> /* D8/A8 B4*/
|
|
, <9 0 &gpio1 6 0> /* D9/A9 B5*/
|
|
, <10 0 &gpio1 11 0> /* D10/A10 B6*/
|
|
;
|
|
};
|
|
};
|
|
|
|
pro_micro_d: &pro_micro {};
|
|
pro_micro_i2c: &i2c0 {};
|
|
pro_micro_spi: &spi1 {};
|
|
pro_micro_serial: &uart0 {};
|