better config, display oled/view, animations bongo cat etc., rgb full, puchi-ble/nicenano_v2, combos, macros, reset/bootloader, ... etc.

build.yaml

@@ -1,3 +1,23 @@
+# ========================================
+# FileName: build.yaml
+# Date: 07.06.2023
+# Author: Marcos Chow Castro
+# Email: mctechnology170318@gmail.com
+# GitHub: https://github.com/mctechnology17
+# Brief: configuration file for ZMK firmware
+# Board: nice_nano_v2 and puchi_ble_v1
+# shield: corne_left nice_view_adapter nice_view,
+#         corne_right nice_view_adapter nice_view,
+#         corne_left, corne_right and settings_reset
+# =========================================
+#                              ╔═╦═╦═╗
+#                       ╔════╗ ║║║║║╔╝
+#                       ║╔╗╔╗║ ║║║║║╚╗
+#                       ╚╝║║╚╝ ║╠═╩╩═╝
+#                         ║╠═╦═╣╚╦═╦╦═╦╗╔═╦═╦╦╗
+#                         ║║╩╣═╣║║║║║╬║╚╣╬║╬║║║
+#                         ╚╩═╩═╩╩╩╩═╩═╩═╩═╬╗╠╗║
+#                                         ╚═╩═╝
 # This file generates the GitHub Actions matrix
 # For simple board + shield combinations, add them
 # to the top level board and shield arrays, for more
@@ -11,14 +31,33 @@
 #   - board: nice_nano_v2
 #     shield: reviung41
 #
+# Split Keyboard Halves Unable to Pair
+#     https://zmk.dev/docs/troubleshooting
+#   - board: nice_nano_v2
+#     shield: settings_reset
+# Reset Split Keyboard Procedure
+# Perform the following steps to reset both halves of your split keyboard:
+# - Put each half of the split keyboard into bootloader mode.
+# - Flash one of the halves of the split with the downloaded settings reset UF2
+# image. Immediately after flashing the chosen half, put it into bootloader
+# mode to avoid accidental bonding between the halves.
+# - Repeat step 2 with the other half of the split keyboard.
+# - Flash the actual image for each half of the split keyboard (e.g
+# my_board_left.uf2 to the left half, my_board_right.uf2 to the right half).
+#
+# After completing these steps, pair the halves of the split keyboard
+# together by resetting them at the same time. Most commonly, this is done by
+# grounding the reset pins for each of your keyboard's microcontrollers or
+# pressing the reset buttons at the same time.
 ---
 include:
-  # - board: nice_nano_v2
-  # shield: corne_left
-  # - board: nice_nano_v2
-  # shield: corne_right
-  # TEST
-  - board: nice_nano_v2
-    shield: corne_left nice_view_adapter nice_view
-  - board: nice_nano_v2
-    shield: corne_right nice_view_adapter nice_view
+  - board: nice_nano_v2 # puchi_ble_v1 nice_nano_v2
+    shield: corne_left nice_view_adapter nice_view # con display
+    # shield: corne_left  # con OLED display
+    # - board: puchi_ble_v1 # puchi_ble_v1 nice_nano_v2
+  - board: nice_nano_v2 # puchi_ble_v1 nice_nano_v2
+    shield: corne_right nice_view_adapter nice_view # con display
+    # shield: corne_right # con OLED display
+    # - board: puchi_ble_v1 # puchi_ble_v1 nice_nano_v2
+    # - board: puchi_ble_v1
+    # shield: settings_reset