Since we're now properly versionining our in-tree boards, adjust the
defconfig checks for the Planck to ensure matrix polling is properly
defaulted on.
Adds serial VCOM inversion command settings for the Nice! View
shield, which fixes the DC biased state the LCD was previously
in when using this shield
This adds a new zmk,indicator-leds device, which maps HID indicator
states onto any devices that implement the LED driver API. This adds
support for things like a caps lock LED.
The name was chosen so that more drivers could be added later as
zmk,indicator-*, for example a version that uses the LED strip API.
To ensure we can tune things when other threads may have priority,
preventing UART processing in time for the studio UI requirements,
adjust our default UART thread priority, and allow overriding as needed.
feat: Add ZMK_BOARD_COMPAT Kconfig symbol, and check for it
To properly detect users selecting a base board ID, when a ZMK variant
is available, add a ZMK_BOARD_COMPAT Kconfig symbol that the ZMK
variants will enable, allowing us to detect using the bare varand and
warn/error in CI so users don't end up with passing CI that results in
an unusable firmware due to missing ZMK enablement for keyboard name,
settings storage, etc.
refactor(boards): Add ZMK_BOARD_COMPAT to ZMK board variants
To clearly indicate the ZMK board variants are set up for ZMK usage,
select the ZMK_BOARD_COMPAT symbols for them.
fix(boards): Fix pillbug board.yml to report extension
Properly not the ZMK variant is part of an extension of the existing
pillbug board.
Newer Zephyr uses a different Kconfig value to control buffers for GATT
client discovery, so adjust our defaults to bump the correct value
Fixes: #3156
refactor(core): Adjust our approach for upstream Zephyr boards
Move to using proper HWMv2 board extensions
https://docs.zephyrproject.org/4.1.0/hardware/porting/board_porting.html#board-extensions
for extending upstream Zephyr boards for use with ZMK. With this change,
using upstream Zephyr board IDs directly, e.g. `seeeduino_xiao` will be
stock versions as found upstream. To use a board variant that is tuned
for ZMK use, use the `zmk` variant, e.g. `seeeduino_xiao//zmk` which is
shorthand for `seeeduino_xiao/samd21g18a/zmk`.
refactor(boards): Move to ZMK specific variants for the nRFMicro board
For consistency, adjust the nRFMicro board definition to offer a
"vanilla" Zephyr board, and then ZMK variants, e.g.
`nrfmicro/nrf52840/zmk`.
refactor(boards): Move to ZMK specific variant for the bluemicro840 board
For consistency, adjust the bluemicro840 board definition to offer a
"vanilla" Zephyr board, and then ZMK variant, e.g. `bluemicro840//zmk`.
refactor(boards): Make tofu65 to ZMK variant by default
Make the standard Tofu65 board ID be `tofu65/rp2040/zmk` or
`tofu65//zmk` by shorthand.
refactor(boards): Move BDN9 to ZMK variant by default
Make the standard BDN9 board ID be `bdn9/stm32f072xb/zmk` or
`bdn9//zmk` by shorthand.
refactor(boards): Move Puchi BLE to ZMK variant by default
Make the standard Puchi BLE board ID be `puchi_ble/nrf52840/zmk` or
`puchi_ble//zmk` by shorthand.
refactor(boards): Move Adv360 Pro to ZMK variant by default
Make the standard Adv360 Pro board ID be `adv360pro_left/nrf52840/zmk` or
`adv360pro_left//zmk` by shorthand and for right as well.
refactor(boards): Move nRF52840 M2 to ZMK variant by default
Make the standard nRF52840 M2 board ID be `nrf52840_m2/nrf52840/zmk` or
`nrf52840_m2//zmk` by shorthand.
refactor(boards): Move Pillbug to ZMK variant by default
Make the standard Pillbug board ID be `pillbug/nrf52840/zmk` or
`pillbug//zmk` by shorthand.
refactor(boards): Move s40nc to ZMK variant by default
Make the standard s40nc board ID be `s40nc/nrf52840/zmk` or
`s40nc//zmk` by shorthand.
refactor(boards): Move nice!60 to ZMK variant by default
Make the standard nice!60 board ID be `nice60/nrf52840/zmk` or
`nice60//zmk` by shorthand.
refactor(boards): Move planck to ZMK variant by default
Make the standard planck board ID be `planck/stm32f303xc/zmk` or
`planck//zmk` by shorthand.
refactor(boards): Move preonic to ZMK variant by default
Make the standard preonic board ID be `preonic/stm32f303xc/zmk` or
`preonic//zmk` by shorthand.
refactor(boards): Move ferris to ZMK variant by default
Make the standard ferris board ID be `ferris/stm32f072xb/zmk` or
`ferris//zmk` by shorthand.
refactor(boards): Move Proton-C to ZMK variant by default
Make the standard Proton-C board ID be `proton_c/stm32f303xc/zmk` or
`proton_c//zmk` by shorthand.
refactor(boards): Move Corneish Zen to ZMK variant by default
Make the standard Corneish Zen board ID be `corneish_zen_left/nrf52840/zmk` or
`corneish_zen_left//zmk` by shorthand and for right as well.
refactor(boards): Move nice!nano to ZMK variant by default
Make the standard nice!nano board ID be `nice_nano/nrf52840/zmk` or
`nice_nano//zmk` by shorthand.
refactor(boards): Move mikoto to ZMK variant by default
Make the standard mikoto board ID be `mikoto/nrf52840/zmk` or
`mikoto//zmk` by shorthand.
refactor(boards): Move Polarity Works boards to ZMK variants
Make the standard Polarity Works board IDs be `zmk` variants.
doc: Update docs/blog post to reference ZMK variants
* Update Zephyr 4.1 blog post to mention ZMK variants
* Add note to hardware support page about variants
docs: Fix up shield board overlays for new board IDs
Adjust our documentation to properly use the correct qualified board
overlay file names that match our new board conventions.
feat(endpoints): add "no endpoint" value
This adds ZMK_TRANSPORT_NONE, which can be set as the preferred
endpoint transport if you wish to prevent the keyboard from sending any
output. More usefully, it also is used to indicate that the preferred
endpoint is not available and it could not fall back to an available
one. To go along with this, many endpoint functions are renamed for
consistency, and a few new functions are added:
- zmk_endpoint_get_preferred_transport() returns the value that was set
with zmk_endpoint_set_preferred_transport().
- zmk_endpoint_get_preferred() returns the endpoint that will be used
if it is available. This endpoint always has the same transport as
zmk_endpoint_get_preferred_transport().
- zmk_endpoint_is_connected() is a shortcut to check if the keyboard is
actually connected to an endpoint.
This change is based on #2572 but without the option to disable endpoint
fallback. It does refactor code to allow adding that feature later.
fix(endpoints): Add endpoint setting upgrade
Adding ZMK_TRANSPORT_NONE at the start of enum zmk_transport results in
the preferred transport setting no longer representing the same values
when it is saved with earlier firmware and loaded with newer firmware.
To fix this, the "endpoints/preferred" setting is now deprecated and
replaced by "endpoints/preferred2". If the old setting is present, it
is interpreted as the old enum type, upgraded to the new type, and saved
immediately to the new setting. The old setting is then deleted.
To avoid this happening again in the future, enum zmk_transport now has
explicit values assigned to identifier, and a comment is also added to
explain that existing values must not be changed.
fix: Set default transport according to enabled transports
The default value for preferred_transport is now set to USB only if
CONFIG_ZMK_USB is enabled. If not, it falls back to BLE if
CONFIG_ZMK_BLE is enabled, then to "none" if nothing is enabled.
